background image

Technical Data

Weight without power saw

2.5 kg

Drive capacity 

from 1.2 kW

Working width

120 mm

Knife width

30 mm

Number of knives

4 units

Areas of Application

The bark-stripper is apt for peeling trunks of any strength.  The thicker and 
harder   the   bark,   the   more   economical   is   its   application.  The   constructive 
formation of the peeling barrel causes a high chipping performance at minimal 
effort. Hard metal pins arranged directly behind the knives are formed in such 
a way that the distance of the peeling knives from the trunk wood is observed 
automatically, and regardless of the bark strength, on the entire trunk length. 
Branch departures and thin branches are easily and cleanly bevelled.    The 
barrel is straight and moulds a plane area similar to the parer. So, in working 
at the side of the trunk and in peeling root departures, the device can be 
applied in an angular or diagonal manner. The device may only be used as 
intended for the listed operations.

Mounting the bark - stripper to the Chain Saw

The stripper can be assembled to ordinary power saws from 1.2 kW.  The 
fitting attached parts for the saws mentioned in the accompanying documents 
and bills of delivery are included in delivery. The peeling head carrier is to be 
assembled instead of the sword. For assembly, the chain folding plate, sword 
and   chain   pinion   must   be   removed.   The   chain   pinion   is   replaced   by   the 
coupling barrel with V-belt pulley (0206).  The peeling head carrier (0201) is 
fastened instead of the sword in connection with the chain wheel cap.  The 
peeling head (0202) is slided onto the peeling head carrier (0201). The V-belt 
is laid onto the V-belt pulley (0206) of the coupling barrel and the V-belt pulley 
(0204) of the peeling head.  The V-belt is prestressed and the peeling head 
(0202)   is   fastened   by   tightening   the   clamping   screw   (0207).   Subsequent 
clamping, as with the normal chain, is done with the chain adjuster of the 
power saw. Sharp metal edges at the power saw – in the V-belt area – should 
be rounded. The supply of chain oil must be prevented by shutting down the 
oil pump or by emptying the oil tank.

Summary of Contents for ESG1









Reviews: