INSTALLATION REQUIREMENTS
ELECTRICAL REQUIREMENTS
Naturewasher™ includes a 120/240V, 50/60Hz adapter designed to work with any North American
standard outlet.
Note: Never use an extension cord or power adapter other than the one provided with
Naturewasher™.
WATER REQUIREMENTS
Water pressure of 20 to 100 psi is required to correctly operate your Naturewasher™.
LOCATION REQUIREMENTS
Naturewasher™ should be located in a temperature controlled environment with low humidity and
access to a cold water supply. (Naturewasher™ is designed to attach to your existing washing
machine.)
Note: Never install the Naturewasher™ in an area where water may freeze, as the unit retains some
water in it and freezing can cause damage to its components.
10
9
NATUREWASHER™ INSTALLATION INSTRUCTIONS
WHAT YOU NEED:
Naturewasher™ Unit
Mounting Plate
4 Anchors
1. Find a spot near your cold water faucet and close to your washing machine where
Naturewasher™ can be mounted to the wall.
2. Hold the Mounting Plate in desired spot (screw dimples should be facing out). Mark your screw
holes with a pen then with the 4 anchors in place use the 4 screws and secure the mounting plate
evenly on the wall. (A level is recommended to ensure the Mounting Plate is horizontal. A tilted
installation may affect the operation of the Naturewasher™.)
3. Align the 4 sockets on the backside of your Naturewasher™ with the Mounting Plate and carefully
slide the unit down until it feels secure.
4. Turn off your home’s cold and hot water faucet located near your washing machine. Turn your
washing machine settings to cold water only and run the machine for a moment to help remove
excess from the cold water hose.
5. Remove the existing hose from the cold water faucet but keep the hose attached to your washing
machine. Connect your existing hose to the area marked “outlet” on the Naturewasher™. Do not
overtighten, but be sure that there is a secure fit.
6. Attach the included Naturewasher™ Laundry Hose to the area marked “inlet” on the
Naturewasher™. Attach the other end to the cold water faucet. Tighten both ends of the hose, but
4 Screws
Naturewasher™ Laundry Hose
Screwdriver
