9
Table of Contents
Getting Started:
• important Safety instructions..................................................1-2
• Sweeper parts..........................................................................3
• Wire and grounding instructions............................................4
• Assembling the Vacuum..........................................................4-5
• operation ................................................................................6
• Edge Cleaning..........................................................................6
How To:
• Change the Belt.......................................................................7
• Change the Vacuum Bag.........................................................8
• Change the UV Lamp..............................................................9
• Reset the Circuit Breaker........................................................10
Warranty Information:
..........................................................11
Changing the UV Lamp
1. Use a phillips-head screwdriver to remove the 2 screws located on
the bottom of the main body. See following figure.
2. Depress 2 clips on the back of the hood to gently release the hood
from the main body.
3. gently unplug the UV lamp from the lamp terminal and replace with
a new UV lamp.
power off before replacing the UV lamp and replace with identical type lamp.
Rating Voltage: 220VAC
8W, wave length: 253.7nm
peak Value: 780
Working Voltage: 65VAC
