background image

z

 

INSTRUCTIONS

PLEASE CAREFULLY READ THIS MANUAL BEFORE 

OPERATING THIS MACHINE

Do not use this vacuum to clean up liquids such as water, detergent 

or other wet fluids.

Do not use this vacuum to clean up small granules such as flour, 

cement or plaster powder or large objects such as toys or balls of 

paper. That will cause the vacuum to become blocked and overheat.

Use a damp cloth with mild detergent to clean the outside of this 

machine.  Make sure it is unplugged from the wall outlet before 

cleaning it.

Do not store this vacuum in very high or low temperatures. Do not 

let it sit in the sun.  Store it in a cool, dry spot.

Charge the batteries fully before using it the first time. If this unit 

is stored a long time, you may need to recharge the batteries before 

using it again. 

When the usage time is becoming shorter as the batteries weaken, it 

may be necessary to replace the battery pack.

Charge the battery pack only with the adaptor that is provided with 

this machine. Do not disassemble the battery pack or get it close to 

liquids. Do not place the battery pack near high temperatures. Do not 

disassemble the battery pack.

If this vacuum is not working properly, contact custserv@edenpure.

com.  Do not try to repair the unit yourself.

Do not let children play with or use this machine or the battery pack.

z

 

USES

u

 Low Speed, High Speed, Off

Press the Speed Control Button once to turn the unit on. Press it 

again to turn the unit off. Use the Speed Control Button on the side of 

the unit to switch the speed between low and high.

u

 Use of 2-in-1 Upholstery Brush

1.  Insert the 2-in-1 Upholstery Brush into the hole below the  

Dust Cup Assembly, then push out the brush head of the  

2-in-1 Upholstery Brush by pressing the button and pushing the 

brush out at the same time. You can then clean furniture, home 

appliances, book shelves, wardrobes, vanity tables, PC keyboards 

and many other places.

2.  Pull the brush head back by pressing the button and pushing 

the brush back in at the same time. You can then clean beds, 

curtains, sofas and many other places.

u

 Use of Motorized Floor Brush

Insert the Motorized Floor Brush into the end of the lower Vacuum 

Tube or into hole below the Dust Assembly. You can then clean 

carpet, tile and other flooring.

u

 Pet Brush

Insert the Pet Brush into the end of the lower Vacuum Tube or into 

the hole below the Dust Assembly. Brush your pet’s fur with the 

exposed brush. When the brush is full, turn the vacuum off and let go 

of the brush release to clean the fur off.

u

 Charging the Unit

Use the included adaptor to charge the battery. Plug the adaptor into 

the Charging Port on the Motor and plug the other end into a wall 

outlet. When it is charging, the lights will turn blue one by one as it 

charges up. When all 3 blue lights are on, it is fully charged and you 

can remove the adaptor. 
You can also charge the battery when it is outside the unit by plugging 

the adaptor into the Charging Port on the battery and plugging the 

other end into the wall.

Summary of Contents for A5970












Reviews: