READ AND SAVE THESE INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fi re, electric shock, and injury to
persons, including the following:
WARNING
IMPROPER USE OF THIS FAN COULD RESULT IN RISK OF FIRE, ELECTRIC SHOCK,
AND INJURY TO PERSONS
WARNING
ANY REQUIRED SERVICE OTHER THAN ROUTINE CLEANING SHOULD ONLY BE
PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE AND ANY
OTHER REPAIRS ATTEMPTED BY ANYONE OTHER THAN AN AUTHORIZED
SERVICE REPRESENTATIVE WILL VOID THE WARRANTY.
FOR AUTHORIZED SERVICE, CALL 1-800-225-6595 OR VISIT
WWW.EDENPURESUPPORT.COM
WARNING
RISK OF ELECTRICAL SHOCK DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
IMPORTANT INSTRUCTIONS
• Always operate the product from a power source of the same voltage,
frequency and rating as indicated on the product identifi cation plate.
• Remove the unit from its packaging and check to make sure it is in good
condition before using.
• Do not let children play with parts of the packaging (such as plastic bags).
• Close supervision is necessary when the product is used by or near children
or persons with reduced physical, sensory or mental capabilities. Do not allow
children to use it as a toy.
• Do not operate any product with a damaged cord or plug, or aft er the
product malfunctions, or is dropped or appears damaged in any way. Contact
Customer Service for repair or replacement.
• Before unplugging the power cord, be sure to turn the power off . When
touching the unit, be sure your hands are dry to prevent electrical shock.
• Never install the unit where it is exposed to direct sunlight, excessive
moisture/rain, dust and lack of ventilation near any heat sources.
• Avoid making contact with moving parts. Never insert fi ngers, pencils or
any other objects through the guards whenever the power plug is connected,
especially while the unit is working.
• Always place the fan on a stable, level surface when operating to prevent the
OPERATING INSTRUCTIONS
NOTE: Before inserting the plug into a power outlet, make sure that the correct
voltage being used, corresponding to what is indicated on the rating label.
CAUTION:
Select a suitable location for the fan. Always choose a safe location
in accordance to the safely recommendations outlined.
1. Unpack the fan gently.
2. Remove the protective foam and plastic bag and save it for future use.
3. Place the fan on a dry, fi rm and level surface.
4. Plug the DC Plug of the adaptor to the DC connector that is located at the
fan’s base.
5. Press the power button to turn the unit “ON”.
6. Set the desired speed through the fan control button from 1-12 levels.
7. Set the desired time (hours) that you expect the fan to run from 1-9 hours.
8. To turn the unit OFF, press the power button.
CAUTION:
Th e fan should always be switched off when making any
adjustments to the fan head angle, or before moving the unit to a diff erent
location.
Adjust the fan to the desired angular air output direction.
CARE & CLEANING
NOTE: If the power cord set of this appliance becomes damaged, discontinue
use. Repairs should be undertaken only by a qualifi ed technician. Contact
Customer Service.
ON/OFF Button
Fan Level
Down
Fan Level Up
Timer Control:
Less Time
Timer Control:
More Time
Oscillation
I-5520 BR11745R-1.indd 3
3/7/18 1:08 PM
