6
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120 V 60Hz power outlet.
and
turn on the power switch in the rear of the unit.
Insert 2 AAA batteries into the remote control before using (batteries not included).
OPERATING INSTRUCTIONS
1.
Start and Select Working Mode
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the ON/OFF button on the
supplied remote control.
Once power is off, heating element will stop working at
first. Fan will continue to run for 3 min. to emit residual
heat inside.
Or
Select a heat Mode
Press the MODE button to toggle between the three heat
modes.
Remote Control
℃
/
℉
button: Button for alternating between Fahrenheit and Celsius
ON/OFF button: Used for turning the power on or off
Temp up button: To increase temperature
Temp down button: To decrease temperature
Timer button: Used for setting timer and adjust time value of timing
Mode button: Used for mode selection