9
Can I move the heater around while it is operating?
It is not recommended to move any portable heater while it is operating.
We recommend moving the heater once the fan has completely turned off.
What is the life expectancy for the Quartz Elements?
Average element life is 5000+ hours or approximately 3 to 5 years. The
Quartz Elements are replaceable by an authorized service dealer.
What is Zone Heating?
Zone heating is all about focusing heat where people spend the most
time. After all, there is no point to heating multiple rooms to 68+ degrees
when not in use.
How many kilowatts per hour does the heater use?
Heater Model 1000-XL was tested by an independent lab in a home
environment and determined to use approximately 1.263 kilowatts per hour.
Heater Model 500-XL uses approximately half the kilowatts per hour as the
1000-XL model.
What is the BTU Rating for the heaters?
Heater Model 500-XL is approximately 2300 BTUs.
The BTUs are basically irrelevant as a unit of measure since the patented
heating process of the EdenPURE
™
INTENTIONALLY does not operate
using old inefficient methods of heat combustion, which is rated by using
the BTU rule. Our heating method is far superior for efficiency, safety,
comfort, and providing a natural healthy indoor environment.
Can I use the heater and another appliance at the same time?
Yes, as long as they are not on the same circuit. Zone heaters are
considered to be an appliance. You should not run more than one larger
appliance on a single circuit breaker. Your freezer, refrigerator,
microwave oven, washing machine, dryer, and other such appliances
should not share a circuit breaker.
Can I use an extension cord, surge protector, or power strip with my
heater?
It is not recommended. It is designed to plug directly into a grounded
110 volt 15 amp or higher circuit receptacle. However, if you have to use
an extension cord, the cord should be No. 14 AWG minimum size and rated
not less than 1875 watts. The extension cord should be a 3 wire cord with a
grounding type cord and plug connector.
I don’t have a grounded outlet; can I use a cord adapter or remove
the grounding plug?
NO. If you don’t have a grounded outlet, contact a licensed electrician
in your area for advice. Removing or altering any part of the heater will
void the warranty.
28
LIRE ATTENTIVEMENT TOUTES LES INSTRUCTIONS AVANT
D’UTILISER L’APPAREIL DE CHAUFFAGE
Fonctionnement- Installation en 7 étapes pour modèles EdenPURE
™
500-XL
1) Déballer l’appareil: couper la partie recouverte de ruban adhésif, rabattre les volets et
renverser doucement la boîte entière la tête en bas. Soulever la boîte pour l’extraire
de l’emballage de polystyrène. Enlever ce dernier, tourner en remontant vers le haut.
Nous vous recommandons de garder l’emballage pour l’entrepôt de l’article durant la
période de non utilisation et au cas où vous auriez besoin de le transporter.
2) Trouver un endroit stable et non encombré pour y mettre l’appareil
une fois déballé.
3) Brancher le cordon d’alimentation directement sur une prise de
courant reliée à la terre 110 volt 15 amp ou plus, non en service.
Pousser le bouton levier rouge situé sur le gril frontal en position
« I » pour le faire démarrer; une fois alimenté electriquement il
deviendra rouge.
4) Ajuster les commandes « Haute temp » et « Basse temp » jusqu’à
ce que vous obteniez la température désirée.
5) Si vous mettez le bouton en position « Arrêt » lors d’un cycle de chaleur, le
ventilateur fonctionnera jusqu’à ce que toute la chaleur interne ait été chassée.
6) Cet appareil de chauffage est équipé d’un limiteur thermique situé a l’intérieur de
l’appareil. Si l’appareil de chauffage cesse soudain de fonctionner, débranchez et laissez
l’appareil de chauffage se refroidir complètement. Puis rebranchez pour remettre en
marche. Si l’appareil continue à mal fonctionner, ou s’il ne parvient plus à se remettre en
marche, veuillez contacter immédiatement nos services d’entretien.
Entretien du matériel –
Essuyer avec un chiffon souple et humide.
Rangement de l’appareil de chauffage –
Quand l’appareil de chauffage ne va pas être
utilisé pendant une période assez prolongée, faire les choses suivantes s’il vous plaît:
1) Débrancher l’appareil.
2) Enrouler le cordon d’alimentation de façon à ne pas le laisser en contact avec le sol.
3) Couvrir l’appareil pour empêcher la poussière de s’accumuler sur le filtre ou
à l’intérieur.
4) Ranger l’appareil dans un endroit sec à faible teneur en poussière.
Service –
Pour remplacer un élément de chauffage ou dans le cadre d’autres réparations
ou d’un service spécifique, veuillez contacter le concessionnaire chez qui vous avez
acheté l’appareil ou adressez-vous à un centre service agréé dans votre région en allant
sur www.edenpureservice.com ou appelez-nous au 1-866-786-8946.
Entretien • Fonctionnement • Service
= ON
= OFF
GARDEZ CES INSTRUCTIONS
(MARCHE)
(ARRÊT)
EdenPureStore.com
1-888-499-8656