1) Unpackage unit. We recommend keeping the packaging for storage and any transporting needs.
2) Find a level and unobstructed location to place the unpackaged unit.
3) Plug the power cord directly into an unused grounded 110 volt 15 amp or higher circuit receptacle.
4) Remove the tab in the remote control to activate the battery of the remote control.
5) Make sure the POWER SUPPLY button, on the back of the unit, is in the ON position.
6) Press the POWER button in the control panel to turn on the unit.
7) To turn the unit off, press the POWER button; the fan will continue to run until all of the heat or air has been expelled.
display Setting: The 360 Super Climater
®
is equipped with multiple temperature scales, i.e. Fahrenheit and Celsius. To change between these scales,
press and hold the Mode button until the display flashes. Pressing the TIMER button will cycle through the scales. Stop pressing the TIMER button once your
preferred scale is displayed. The display will stop flashing in a few moments. You can continue normal operation of the unit after the display stops flashing.
Auto ON Timer: With the unit OFF, press the TIMER button to select the number of hours you want the unit to wait until it powers on. You can select between
1-24 hours. Unit will power on at the last heat setting it was operated at.
Auto OFF Timer: With the unit ON, press the TIMER button to select the number of hours you want the unit to operate before it turns off. You
can select between 1-24 hours.
To disengage the timer feature, simply press the TIMER button until the timer is no longer indicated on the display.
Mode Function: Press the MODE button when you wish to run the unit at a lower noise/power level.
Press and hold “Mode” and use arrow keys to adjust display brightness.
Fan Mode: Speeds High to Low: FF F9 F8 F7 F6 F5 F4 F3 F2 F1
PRODUCT SETUP
PRODUCT MAINTENANCE
FUNCTIONS
Cabinet Care – Wipe clean with a soft damp cloth.
Storage – When the unit is not going to be used for an extended period of time, please do the following:
1) Unplug the unit.
2) Wind up electrical cord so as to keep it off of the ground.
3) Cover the unit to prevent dust from accumulating on filter or internally.
4) Store the unit in a dry, low dust environment.