EN
Instruction Manual
[34]
•
Do not use abrasive products, solvents, metal cleaning liquids or undiluted detergents.
•
Dry with a cloth afterwards
•
Keeping the condenser clean is very important to optimize its operation and reduce
electricity consumption. Use soft brushes or a vacuum cleaner for this.
The access to the electric parts of the device is by means of a removable condensing unit as
shown in figure 14.
5.3 MACHINE DISPOSAL
The product is made up of metal parts and stone parts. The packaging is made of wood, plastic
and cardboard. For any part of the appliance, please note that:
•
At the end of the product’s life-cycle, make sure it is not dispersed in the environment.
•
Each part must be collected and disposed of separately, according to their distinctive
characteristics (e.g. metals, plastic, rubber, etc.)
•
The public or private waste collection systems defined by local legislation must be
considered.
•
The equipment may contain hazardous substances: the improper use or incorrect
disposal may have negative effects on human health and on the environment;
•
In the event of illegal disposal of electrical and electronic waste, penalties are specified
by local waste disposal legislation.
6 TROUBLESHOOTING CHART
6.1 TROUBLESHOOTING CHART
The appliance electric motor has a thermal protector included that trips in the event of
overcurrent or lack of current. When this protector trips, the appliance must be disconnected
to prevent malfunctioning.
Connect the appliance after an hour and contact your technical service in the event the problem
remains.
Some problems are due to causes that are easily resolved without having to contact the
technical service. Please read the following table carefully:
Problem
Procedure
The appliance does not work
Check that the appliance is correctly connected to the
electricity socket and control panel, and that the
automatic power limiter has not tripped.
Does not cool sufficiently
Check the regulation of the thermostat and/or influence
or direct sources of heat and air currents on the tray.
Make sure that the condenser of the cooling unit is
completely clean
Excessive noise when operating
Make sure that the appliance is correctly levelled.
Check the anchoring system of the appliance elements
that may have moved or become loose.
All the basic checks have been
carried out and the problem
remains
Contact your distributor or your Technical Assistance
Service.
