
It is compulsory to carefully read this Instruction manual before any operation on the machine: serious damages to persons and thinks could occur
if operated by non-qualified personnel.
!
All single components of machine are subject to quality and dimensioning checks during production process.
All maintenance, regulation and replacement operations described in this Instruction manual are to be only performed after stopping and separat-
ing the machine from power supply and hydraulic circuit.
While installation/maintenance operations, the operator must wear protection gloves.
Operator must wear special antiskid and resistant shoes.
Protections have been set up by the Manufacturer in order to physically protect operator while performing its tasks. Do not remove protections for
any reason, during operation. If removed must absolutely be restored.
Persons not involved in installation/maintenance operations, if any, should neither transit nor stop close to the operation area.
Electric energy and grounding systems are to be connected by expert and qualified personnel, in compliance with standards in force.
!
It is recommended to protect main power supply line by safety switches (overload switches).
Any magnetic or electromagnetic field in the nearby could affect proper operation of control panel. Environmental temperature and humidity are the
best conditions to properly operate machines.
Ensure that electric circuit is suitably protected and complies with motor characteristics: the machine is equipped with an identification plate,
specifying power, frequency and power supply voltage values. Also ensure that grounding has been performed and a differential switch is regularly
installed upstream of power supply cable. The Manufacturer is not responsible for damages to persons or things provoked by wrong or unsuitable
grounding.
Before performing regulation, maintenance and/or replacement operations, the operator must wait for a time-period after machine stop.
MAIN WARNINGS TO MACHINE USE
Summary of Contents for SOFT NC
Page 1: ...SOFT SOFT ECM 2015 3 Installation operation and maintenance manual...
Page 20: ......
Page 21: ......
Page 23: ......