background image

14 

Frequency enhancement results from cabinet placement and room acoustics. 
A cabinet placed on the floor will have the lower frequencies boosted by 
about 3 dB. Placement against a wall adds another 3 dB. A corner adds 3 dB 
more. Consequently you may find a surprising boominess to your sound. 
Certain qualities in the room itself can also enhance the lower frequencies, 
further contributing to this problem. Frequently this effect is more noticeable 
in the audience than it is on stage. Compensating for it may result in a stage 
sound that may seem a little thin. However the sound is actually quite full 
out in front. 
 

NOTE

; Remember, you can’t equalize out major physical room anomalies. 

If things sound really weird where you are, try moving you rig a few feet 
and see if that helps. This may be particularly helpful on saggy stages that 
bounce like a drum head. (

The propellerhead term for this is 

“diaphragmatic.” So says David. – LB

 

YOU’RE DONE. GO PLAY

 
There you have it: a quick and easy process to help you get the perfect tone 
from your Nemesis amplifier. As previously mentioned, it make take a few 
extra minutes the first few times you go through this, especially if you take 
the time to experiment with all the knobs and switches, which we highly 
recommend. 
 
We are confident that the time you spend getting to know your new friend is 
an important investment, one that will pay off immeasurably in 

Great Bass 

Tone

. And, after all, that’s why you bought an Eden, right? 

 

OTHER CONSIDERATIONS 
 
Suggested Speaker Systems 

– Your speaker system should be chosen to 

accommodate the characteristics of your amplifier and your predominant 
application. If you will only be using one cabinet, a 4 Ohm model will draw 
the most current from your amplifier. If you will generally be using two 
cabinets, they should both be 8 Ohm models so their combined impedance 
will be 4 ohms. If you are uncertain about your future needs, always go with 
the 8 Ohm speaker option so that you can add another speaker later if you 
need to. In general, adding more speakers will give you a greater volume 
increase than adding a few more watts. 
 

Summary of Contents for Nemesis NA320


















Reviews: