©2008 Edelbrock Corporation
Catalog #70021 & 70022
Brochure #63-0129
Rev. 7/08 - AJ/mc
Page 2 of 3
A
Item
Qty.
Description
A
1
Performer RPM Plate
B
2
Gaskets
C
1
Performer RPM Nitrous Solenoid
D
1
Performer RPM Fuel Solenoid
E
2
1-up Solenoid Bracket, Performer RPM
F
4
Solenoid Mounting Screws
G
1
8 inch Steel Braided Fuel Line
H
1
12 inch Steel Braided Nitrous Line
I
1
Performer RPM Jet Pack
J
1
4AN X ¼”NPT N2O Filter Fitting
K
1
6AN X ¼”NPT Red Fuel Fitting
L
1
4AN X 1/8”NPT Straight Red Fuel Fitting
M
1
4AN X 1/8”NPT Straight Blue Nitrous Fitting
B
C
D
E
F
G
H
I
J
K
L
M
11. Install the remaining 1-up Solenoid Bracket using the 2 remaining Solenoid Mounting Screws onto your Performer
RPM Fuel Solenoid and mount the solenoid where you had previously mounted your Performer Fuel Solenoid.
12. Install the 8 inch Steel Braided Fuel Line
(Item G)
to the outlet fitting of your Performer RPM Fuel Solenoid.
13. Install the corresponding fuel jet for the horsepower level you have selected into the inlet fitting on your Performer
RPM Plate.
14. Connect the remaining end of your 8 inch Steel Braided Fuel Line to the inlet fitting of the plate with the jet in place.
