©2006 Edelbrock Corporation
Rev. 5/06 - DA/mc
Catalog #68512, #68513
Brochure #63-68512
Page 1 of 2
SHORTY HEADER
for 1987-1991 Dodge Dakota Truck (All),
3.9L V6 Engine
Catalog #68512, #68513
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your new Shorty Header. If you have any questions, please call
our
Technical Hotline at: 1-800-416-8628
from 7:00 am - 5:00 pm, Monday-Friday, Pacific Standard Time or e-mail
us at
. Please fill out and mail your warranty card.
HEADERS:
These components are designed to improve the exhaust efficiency of the Dodge 3.9 Litre V6 engine with E.F.I.
(Electronic Fuel Injection). These tubular manifolds are a direct replacement for the factory exhaust manifolds. A
performance gain can be expected by the installation of this system. This system does not require welding for installation
and retains all O.E.M. emissions equipment.
SUGGESTED TOOLS FOR INSTALLATION:
❑
3/8" ratchet socket set with extensions and sockets
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Combination set of open-end wrenches
❑
Liquid penetrant, anti-seize compound
SPECIAL NOTICE:
This Edelbrock part has received an Executive Order (E.O. #) from the California Air Resources Board
(C.A.R.B.) making it legal for street use on pollution-controlled motor vehicles in all 50 states. To assist you with emissions
equipment certification, we have included a silver fan shroud decal to help testing personnel verify that this part is a legal
replacement part on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed to your fan shroud
next to the existing emission and engine specification decal. Do not cover your original equipment specification decal with
the Edelbrock fan shroud decal.
WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your
headers. Those products can cause excessive heat and moisture buildup resulting in corrosion and early
failure of the system.
NOTE: High temperature spark plug wires and boots are recommended to withstand heat from Headers.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
result in poor performance and engine or vehicle damage.
HARDWARE SUPPLIED
Catalog #68512 (Ceramic-Coated), #68513 (Ti-Tech Coated)
Qty.
Description
Qty.
Description
❑
1
#25-9275 Header left side (#68512)
❑
2
Hex nuts; 5/16” - 24
❑
1
#25-9276 Header right side (#68512)
❑
4
Hex nuts; 3/8” - 16 (plated)
❑
1
#25-9020 Header left side (#68513)
❑
2 Hex nuts; 10-32
❑
1
#25-9021 Header right side (#68513)
❑
1
Band clamp; 1-1/2”
❑
4
Hex bolts; 3/8” - 16 x 2”
❑
2
Star washers; 3/16” (internal)
❑
2
Manifold gaskets
❑
1
Round head screw; 10-32 x 1-3/4”
❑
1
Heat stove plate
❑
2
Studs; 5/16” x 1-1/2”
❑
1
Hex cap screw; 10-32 x 1/2”
❑
2
Lockwashers; 5/16”
❑
1
Flat washer; 3/16”
❑
4
Lockwashers; 3/8”