30
31
GETTING STARTED
Battery Installation
Follow these instructions to add a battery.
Use a coin to turn bottom cap counter-clockwise
to Open position and remove cap. Install one AAA
battery (included) with the + facing up. Replace
the cap and turn clockwise to Close position.
Inserting and Removing Tips:
Select the desired tip and
push it firmly into place on the
handle. To remove, simply pull
the tip off.
WHEN USING FOR THE
FIRST TIME
On first use, or if the unit has not been used for a while,
the FLOSSERPIK needs to be primed with water. Fill the water tank
to the max fill line (800ml) and turn the pressure dial to the max-
imum setting. Point the water jet attachment towards the sink and
turn the unit on. Within 1 minute, water will begin to flow through
the attachment. Reduce the pressure to the lowest setting (or your
desired level) before use.
Filling the Water Tank
Remove the water tank from the base and fill with lukewarm water
(do not use hot water). Put the tank back on base and press down
firmly to seat it.
