Don’t forget to check your work with a level as you go!
Page 6 of 8
www.eDecks.co.uk
All images are for illustration only, Please see individual item listings for actual item specifications
Step 7
Equally space* the remaining spindles and secure again with 2 x 50mm screws. One through the handrail, and one through the underside
of the base rail, as shown in diagram below.
*Please note, you will need to keep the same spindle spacing for between all newel posts if assembling an 11/12 step kit. This will result in
a smaller spacing at the top, but it will make the spacing appear correct.
1 x 50mm Screw
through the underside of the
base rail into each spindle
1 x 50mm Screw
through the top of the
hand rail into each spindle
Step Stringer Handrail Fitting Instructions
