background image

The consumables are classified as:

SMALL:

 the spark fountain height 1.0-3.5m (error 0.5m), and the spot is rarely dropped,use for 

indoor. 

LARGE: 

the spark fountain height 2.0-5.0m (error 0.5m), and the sprayed spot has dropped 

ground,use for outdoor.

Consumables choice:

 Consumables are the customized formula for the test of our 

machines.  Please  select  our  consumables  to  avoid  affecting  the  effect  of  the  machine;  (No 

warranty service is provided for machines damage caused by consumables not from our 
company).

1

2

Consumables

Remark: The detail channel instruction, please refer to attached channel operation; if need use 

console do special effects, then please do programme by yourself.

2nd channel do

fountain (adjust the

fountain height from

up to down)

Push the second channel do fountain.

3

1

2

3

4

5

6

10

8

6

4

2

0

10

8

6

4

2

0

10

8

6

4

2

0

1st channel down a

little bit clean powder

(between 221-239)

End of event -- Clean powder (cleaning operation refer to point 7)

4

1

2

3

4

5

6

10

8

6

4

2

0

10

8

6

4

2

0

10

8

6

4

2

0

Summary of Contents for Pro EDDY-HW-01















Reviews: