7. Master/Slave Control
The MASTER functions as a master as long as it's not in OMX mode (and
ideally no cable plugged into the DMX INPUT on the unit). It sends a
signal to the SLAVE through a DMX cable and synchronizes its settings to
it. Do not use more than 20 lamps or 60m of DMX cable.
The SLAVE units should be set to DMX mode and the address code set to
"A001" to receive the MASTER'S signal. Only one light can be set as a
master, but multiple lights can be set a� slaves .
._ ·}
8. Cable Connection
,--
r
=
-
�Cl/(
C.,,,neo� to Ma� Lt1II�
i.i,rf-,w
1111.ll!
PO'll!llH
B •• , ..
:it
1
1 ... ��-
Sll1Whodoptm:a1,10 8
lllllllilt,i
Eddy
www.Eddylight.com
LED Wall Washer
RGBAW LED LIGHT
LF109
USER MANUAL
TM
