1. Introduction
Thank you for purchasing our LED Wall Washer light. Please read these
instructions carefully before operating to avoid any possible damage and
accidents caused by misuse.
The LED Wall Washer light has a hydrodynamic aluminum shell. Five
colors of high-brightness LED lights (red, blue, green, amber, white) are
used to create a wide spectrum of colors. Each color can be independently
dimmed, faded and so on. It draws low power and is low weight. The built
in programs include dimming, fade, strobe, gradual change and more. The
unit is compatible with the standard OMX 512 signal for external OMX
control. Practical uses of the product include dance halls, stage
backgrounds, hotels, large-scale performances, drapery uplighting and
stage lighting.
Packing List
LED Wall Washer light
User manual
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
Before installation, please check the light's fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor and outdoor use, below 50 deg. C
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected
3. Dimensions and Specifications
Volta·ge: AC110V/240 VAC
Frequency: 50-60 Hz
Power Consumption: 100 W
Lamp: 9pc x 5-in-1 LED (1 OW/LED)
Beam Angle: 25 deg., 45 deg.
Net Weight: 2 Kg
IP Rated: IP65
Dimensions:
t
®
©·© ©·©·0 0·© �
·--
··
·
-
·
··
-.... -·-···-
·
·
·-
·-
··
·
·-
-
-
--
-
.
..
..... ·
·
·
·-
·
·
..
o,;'
i------------67n1,------------'"'
��;
t
fl'\ .,
.
,.
..,.
3
www.Eddylight.com
1-800-914-3538
