VT150
Vertical Crawler™
Document: UMDW013977.docm
Revision: A07
Created by: MDM
Date: 26 Sep 2019
3075042-A07
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW013977.docm
Page 30 of 31
User Ma
nual
Fuse Replacement
Fuses are located on the rear panels of the power supply and interface rack-mount boxes. Fuses must
only be replaced with ones of equivalent type and rating.
Interface Box Fuse
- 5 Amp, 250VAC SLOW
High Voltage Fuse (Power Supply Rack)
- 4 Amp, 600AC fuse (Littlefuse KLKD Midget Series, part#
KLKD004).
Input Fuse
(
Power Supply Rack)
- This fuse must be selected depending on the input voltage.
•
For 115 Volt input: 15 Amp 250 VAC slow
•
For 220 Volt input: 10 Amp, 250 VAC slow
Fuse Diagnostics
Interface Box Fuse
This fuse provides protection for the interface box’s internal power supplies for the video receivers and
communications circuitry. If triggered, this fuse will disable video receivers and vehicle communications.
Vehicle Power Fuse
This fuse is located in line with the 350VDC output to the tether. If triggered, this fuse will disable the
400VDC output but not the power supplies themselves.
This is a high voltage fuse and must only be
replaced with an identically rated fuse type.
Input Fuse (Power Supply Rack)
This fuse protects the high voltage power supply and all auxiliary power supplies within the power supply
rack. If tripped, this breaker will cut power to the supplies and, as a result, all power delivery to the
vehicle. A tripped main power breaker is a sign of a significant and sustained short-circuit either at the
power supplies or within the interface box. This equipment should be carefully evaluated before
attempting to re-power.
Tether Re-termination
Tether termination is a specialized service beyond the scope of this manual. Contact Eddyfi
Technologies if the tether is damaged or requires re-termination.
