VT150
Vertical Crawler™
Document: UMDW013977.docm
Revision: A07
Created by: MDM
Date: 26 Sep 2019
3075042-A07
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW013977.docm
Page 13 of 31
User Ma
nual
Connections - Vehicle & Tether
It is important that the tether be properly connected to the vehicle; otherwise, damage to the system may
result.
1.
Connect the vehicle end of tether to the back of the integrated harness block. Visually line up the
key in the connector before mating. Fully screw down and hand tighten the locking collar.
2.
Secure the tow cable to the Kellems grip on the tether using the quick-link. Adjust the grip so that
there is tether slack between the grip and the vehicle no matter which way the tether approaches
the harness block from as illustrated below.
3.
Verify all device whips from the harness block to their respective components are securely
connected, and the whips are free from damage.
4.
Ensure any unused connectors are capped with dummy plugs to insulate and protect their electrical
contacts.
FIGURE 6: TETHER CONNECTION TO THE VEHICLE