Eddy TBE3, Instruction & Maintenance Manual

Page: 17 / 55

Page | 17
Carbon brushes
The carbon brushes used in your tool have been engineered for many hours of dependable service. To maintain
peak efficiency of the motor, we recommend every two to six months that the brushes must be examined. Only
genuine Eddy 91 replacement brushes specially designed for your tool must be used.
Picture showing where the motor grease needs to be added. The tool need to be re-greased with
a gear lubricant after approximately 40 running hours. Use a PAO base grease with a high
dropping point: e.g.: Lubex Syn grease from Irving