E-TG10-I-0119
E-SPTS-I-0809
800-638-3326 • edcoinc.com • [email protected]
Page 5
EQUIPMENT DEVELOPMENT CO., INC.
Operating Instructions
Exhaust from this engine contains Carbon Monoxide, an invisible, odorless gas that can kill.
In addition, it contains chemicals known, in certain quantities, to cause cancer, birth defects
or other reproductive harm.
Before Operating:
•
Visually inspect machine:
- Verify all guards are in place and fasteners are tight.
- Check engine oil level (gasoline/propane models).
- Inspect power cord for damage and check for proper grounding (electric models).
•
Inspect disc assembly:
- Check discs for damage or wear.
- Check mounting hardware.
- Check belt tension after first 4 hours of use with factory new equipment or after installing new belts.
•
Inspect the work area:
Inspect work area carefully before starting to grind. EDCO will not be held responsible for damage to the
discs caused by striking protruding slab inserts, nails, screws, pipe extensions, machinery bases, or other
objects that transmit sudden shocks.
•
If dry grinding:
- Hook up heavy-duty vacuum.
-
NOTE:
Do not use dry vacuum when wet grinding.
•
If wet grinding:
- Attach hose to water supply.
Important Reminder!
A water mist system or an industrial vacuum
must
be used while operating this equipment and the operator
must wear a respirator. Failure to comply could lead to serious illness and possible death.
Safety warnings and guidelines do not by themselves eliminate danger.
They are not given as substitutes for proper accident prevention and good judgement.
Figure 2
