Printed in USA
TVW
©2008
Page 5
E-SDE14-I-0808
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com
Email: [email protected]
Before Starting:
•
Read and understand the instructions supplied by the engine manufacturer.
•
Familiarize yourself with all saw controls.
•
Visually inspect the entire machine for damage or wear. Remove excess dirt or debris. Check that all nuts, bolts and
screws are tight. Check for proper alignment of moving parts, possible binding of moving parts, breakage of parts,
loose mounting brackets, and any other condition that might affect operation.
•
Inspect diamond blade. Check blades for cracks, loose segments, worn or out-of-round arbor holes. Do not use
warped, twisted, out-of-balance blades or any blade of questionable condition. Refer to
Rx for Diamond Blades
.
Operating Instructions
Blade Guard
Blade
(Optional)
Lifting Bail
Rolling Table
Cutting Guide
Power Cord
On/Off trigger switch
and run lock button
Operator’s Handle
Transport lock down pin, push
saw motor all the way down
and push silver pin in, release
saw motor. (hidden)
Trigger Switch
Run Lock Button
Blade Wrench
Table Lock
