manualshive.com logo in svg

edc HAZ-DUST HD-7204, User Manual, Page: 13 / 93

Share
Download
edc HAZ-DUST HD-7204 User Manual Download Page 13

13 

 

DustComm Pro Software 
 

The HD-7204 comes equipped with DustComm Pro software, which allows the user to look at real-
time concentrations and graphs and internally store data to be downloaded to a PC for further analysis 

 
DustComm Pro software is designed for more detailed analysis of sampled data. Pull down menus 

provides a user-friendly environment to store and analyze data and print management ready reports. 

 
Data can easily be exported in comma-delimited files importable into spreadsheet programs such as 

Microsoft Excel.  

 

The data plots provided with DustComm Pro enable: 

•

 

Detailed statistical analysis. 

•

     Creation of graphics and charts. 

•

  Mathematical correction of particle characteristics when aerosol significantly differs from 

calibration dust. 

•

 

Real time viewing of concentration values and real-time graphs. 

•

 

The ability to wirelessly communicate between the device and the software.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for HAZ-DUST HD-7204






























































































Reviews:

No comments