the Receiver and carrier Installations are now complete. Proceed
to operation for immediate use of datacot™ unit.
Receiver Installation
Select applicable 5.25” drive bay in which to install DataCOT™
receiver assembly. Remove filler plate if present.
Slide receiver frame into the drive bay of the PC case. Secure the
receiver to the PC case using the screws provided.
Refer to the “WIRING DIAGRAM SHEET” for proper data and power
connection.
1.
2.
3.
hard drive Installation for carrier
Remove the DataCOT™ carrier cover. The cover will snap off from
the rear of the carrier.
Mount the hard drive by connecting the male connector of hard drive
to the female connector of the carrier.
Secure the hard drive in place by using the screws provided.
Replace cover on the carrier. The cover will snap into place by
applying pressure to the rear of the cover. If desired, secure cover
using the screws provided for added security.
1.
2.
3.
4.
2
