C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 43 -
5.4
Examining
Once a patient is selected on the
Patient Info.
interface, click
Start
on the interface or the
Examine
button
in the tool bar.The system enters the
Examine
interface, with the
patient's key information displayed on the lower left.On this interface, you can capture images,
take video,make comparison, edit or measure the images.
NOTE:
1. You can open the
Examine
interface only after the camera is connected to the
computer and switched on.
2. If no image is displayed, check whether the USB connection between the computer
and the video capture box is normal.
5.4.1 Examination Prompts
If the function of providing examination prompts is enabled (see section
), prompts are available when you open the
Examine
interface. You can
also click the
Help
tag and view examination guide on the displayed
Help
page.
Figure 5-15
5.4.2 Capturing Images
Click the
Auto Capture
tag
, the auto capture function is enabled (which is
Prompt
