C3A, C6A, C6A HDVideoColposcope User ManualBasic Operations
- 20 -
3.2.2 Adjusting the Stand Height
To get a clear image, you may need to adjust the stand height. Perform the following steps:
1.
Step down the caster pedals to stop the stand from moving around.
2.
Hold the lifting post with one hand, anticlockwise rotate the height adjustment knob to loosen
it. Lift the post up or push it down to thedesired height.
3.
Rotate the knob clockwise to tighten it.
Figure 3-2
CAUTION
When you loosen the height adjustment knob, hold the lifting post with one hand to avoid
sudden fall of the camera.
3.2.3 Adjusting the Camera Angle
To get a clear image, you may need to adjust the camera angle. Follow the instructions:
To adjust horizontal angle: Hold the camera handle with your left hand and rotate the
horizontal angle adjustment knob anticlockwise with the other hand. Now you can tilt the
camera left or right to the proper angle. Rotate the adjustment knob clockwise to tighten it.
To adjust vertical angle: Hold the camera handle with your right hand and rotate the vertical
angle adjustment knob anticlockwise with the other hand. Now you can tilt the camera up or
down to the proper angle. Rotate the adjustment knob clockwise to tighten it.
Loosen
the knob
Tighten
the knob
