Cadence Fetal Monitor User Manual
- 19 -
the left and the face of the paper downward. Put the paper into the box.
3)
Feed the record paper into the slot of the recorder (Figure 4.1) and the paper will go out from
the notch automatically.
Figure 4.1 Diagram of feeding paper
4)
Adjust the paper length by the gear beside the handle if required.
5)
If the paper is slantwise, you must pull the handle up and push the gear to force the paper out,
push the handle down and feed paper again.
6)
After closing the cover, make sure that the paper can go out from the paper notch.
Notes:
1)
When feeding paper, the black handle must be down. If jam happens, pull up the
handle first, and push the gear to force the paper out. Then feed the paper again.
2)
The paper going out from the notch should be aligned, otherwise, the data will be
inaccurate or paper jam will happen.
3)
Only use EDAN approved paper to avoid poor printing quality, deflection, or paper
jam.
4)
The printing function can
’
t be executed when ultrasound transducer or DECG cable
connector falls off.
Figure 4.2 Diagram of feeding paper correctly
Note:
Be careful when inserting paper. Avoid damaging the thermosensitive print head.
Unless inserting paper or shooting troubles, do not leave the recorder door open.
Paper Advance Slot
The side without print
scale will face to user
Handle
