ECX ruckus ECX01000AUT1, Instruction Manual

Page: 5 / 52

5
EN
RUCKUS
®
4WD
CAUTION: If using rechargeable
batteries, charge only rechargeable
batteries. Charging non-rechargeable batteries
may cause the batteries to burst, resulting in
injury to persons and/or damage to property.
1. Slide the panel open on the bottom of the
transmitter.
2. Obey the battery plus (+) and minus (-) diagram
in the transmitter to install 4 AA batteries.
3. Slide the panel closed.
We recommend using only alkaline AA batteries
in the transmitter, however, it is possible to use
rechargeable Ni-MH batteries.
• Never install damaged batteries.
• Never install batteries of mixed types or of different ages in
the transmitter.
• Always remove exhausted batteries.
• Always remove batteries before storing the transmitter.
• Low battery power can result in loss of control of the RC
vehicle.
TRANSMITTER BATTERY SAFETY PRECAUTIONS
REMOVING THE VEHICLE BODY
INSTALLING TRANSMITTER BATTERIES