3
EN
RUCKUS | TORMENT | K&N TORMENT
®
™
™
Transmitter
Frequency 2.4GHz
Battery
AA x 4
Servo
Power Supply
4.8V~6V
Output Torque
41.66 oz (3 kg-cm)
Operating Speed
0.23sec/60 degrees of travel
Size
55.6 x 18 x 30mm
Electronic Speed Control (ESC)
Input Voltage
5–7 cell NiMH/2S LiPo 12T–34T
5–7 cell NiMH/2S-3S LiPo 35T–55T
12T Motor Limit
Electric Capacity
Forward 60A/360A
Electric Capacity
Reverse 30A/180A
BEC Voltage
6V
Size
37.5 x 37.0 x 18.0mm
Weight
1.41 oz (40 g)
Quick Start....................................................................................................4
Vehicle Preparations ....................................................................................4
Charging the Vehicle Battery ....................................................................4
Charging Warnings ...................................................................................4
Installing the Battery.................................................................................5
Transmitter Controls ..................................................................................5
Installing Transmitter Batteries ................................................................5
Binding ......................................................................................................6
Changing the Throttle Limit ......................................................................6
Getting Started..........................................................................................6
Operation......................................................................................................7
When You Are Finished................................................................................7
Motor Care ...................................................................................................7
Maintenance ................................................................................................8
Setting the Gear Mesh..............................................................................8
Electronic Speed Control (ESC) .................................................................8
Electrical Layout ........................................................................................8
Shock Cleaning..........................................................................................9
Fasteners ......................................................................................................9
Troubleshooting Guide ...............................................................................10
Limited Warranty .......................................................................................11
Warranty and Service Contact Information ...............................................12
FCC Information..........................................................................................12
IC Information.............................................................................................12
Ruckus Parts Diagram ......................................................................... 46–47
Torment Parts Diagram ....................................................................... 48–49
Replacement Parts .....................................................................................50
Optional Parts.............................................................................................51
TABLE OF CONTENTS
COMPONENTS
• ECX
®
Ruckus
®
Monster Truck or Torment
™
Short Course
Truck or K&N Torment
™
Short Course Truck
• Spektrum
™
STX2
™
2-CH Transmitter
• AA (4) Batteries
• 10W LiPo AC Balance Charger
• Dynamite
®
7.4V 1800mAh 2S 20C LiPo, Hardcase
with EC3
™
connector
• Dynamite
®
15T Brushed Motor
• Dynamite
®
60A WP Brushed ESC
• Spektrum
™
SRX200 2-CH Receiver
SPECIFICATIONS
Wet Conditions Maintenance
• Remove the battery pack(s) and dry the contacts. If you have an air
compressor or a can of compressed air, blow out any water that may be
inside the recessed connector housing.
• Remove the tires/wheels from the vehicle and gently rinse the mud and dirt
off with a garden hose. Avoid rinsing the bearings and transmission.
NOTICE:
Never use a pressure washer to clean your vehicle.
• Use an air compressor or a can of compressed air to dry the vehicle and
help remove any water that may have gotten into small crevices or corners.
• Spray the bearings, drive train, fasteners and other metal parts with a
water-displacing light oil or lubricant. Do not spray the motor.
• Let the vehicle air dry before you store it. Water (and oil) may continue to
drip for a few hours.
• Increase the frequency of disassembly, inspection and lubrication of the
following:
• Front and rear axle hub assembly bearings.
• All transmission cases, gears and differentials.
• Motor—clean with an aerosol motor cleaner and re-oil the bushings
with lightweight motor oil.
2.4GHZ DIGITAL
RADIO SYSTEM
