4
EN
WARNING:
Failure to exercise caution while using this product
and comply with the following warnings could result in product
malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and
property damage.
• NEVER LEAVE CHARGING BATTERIES UNATTENDED.
• NEVER CHARGE BATTERIES OVERNIGHT.
• Read all safety precautions and literature prior to use of
this product.
• Never allow children under 14 years of age to charge batteries.
• Never attempt to charge dead or damaged batteries.
• Never charge a battery if the cable has been pinched or shorted.
• Never allow the batteries or charger to come into contact with moisture at
any time.
• Never charge batteries in extremely hot or cold places (recommended
between 50–80°F [10–26°C]) or place in direct sunlight.
• Always use only Ni-MH rechargeable batteries. This charger cannot charge
batteries such as “heavy duty,” “alkaline,” “mercury” or “lithium” batteries.
• Always connect to the charger correctly.
• Always disconnect the battery and charger after charging and let them cool
between charges.
• Always inspect the battery before charging.
• Always terminate all processes and contact Horizon Hobby if the product
malfunctions.
• Always make sure you know the specifications of the battery to be charged
or discharged to ensure it meets the requirements of this charger.
• Always constantly monitor the temperature of the battery while charging.
• Always end the charging process if the charger or battery becomes hot to
the touch or starts to change form during the charge process.
CHARGING WARNINGS
STEP 1: CHARGE THE VEHICLE BATTERY
1. Connect the Dynamite
®
Speedpack
®
Ni-MH battery to the 100mA charger.
2. Connect the charger to an AC wall outlet.
3. Allow the battery pack to charge for
9
hours.
GETTING STARTED
1
Charge the battery
2
Assemble the chassis
3
Paint the body
4
Install the battery
5
Setup the transmitter
6
Drive!
5
1
3
4
2
Thank you for purchasing the Barrage
®
Scaler Build-To-Drive™ Kit.
The kit includes:
• Dynamite
®
100mAh 9V AC charger with EC3™ connector
• Dynamite
®
Speedpack
®
900mAh NiMH battery with EC3™ connector
• Dynamite
®
Tazer™ 390 motor
• Dynamite
®
60A WP FWD/REV Brushed ESC
• ECX
®
2.4GHz 2-CH receiver
• ECX
®
2.4GHz 2-CH transmitter
• Spektrum™ S602 digital servo
The kit also includes 12 bags: the main bag containing the decal sheet,
window mask, tools, AA batteries, and 11 build bags (A–K). Each bag
contains secondary bags labeled with the corresponding assembly step
numbers. Open the main bag first. Then open the part bags, one at a
time. Follow the assembly steps in order!
STEP 2: ASSEMBLE THE BARRAGE SCALER
Summary of Contents for BARRAGE ECX01011
