ECUE Butler PRO, Setup Manual, Page: 13 / 52

13
Setup Manual - Butler PRO
y
For the device name press the OK key to initialize editing mode and select position
and value as above. Press
OK
again to get to the command selection in the top
row. With the or key select to save, cancel or delete characters. Select the
cross to cancel, the checkmark to apply the changes or the back-arrow to delete
the characters in the name. Press the OK key.
With the parameter Advanced settings > an additional level of functions is
entered for special features. Use the key to leave this menu or any other menu
level to return to operational mode. In the setup parameters there is an additional
command set for Test Mode. Select this test mode by pressing the right-key when
Enter Test Mode > is displayed.
Setup parameters and values
Standard parameters
enter Password
With the cursor keys and select position and
with or characters. Press OK to enter the
password.
Setup IP
192.168.123.200
The IP address of the Butler PRO. Factory default
is 192.168.123.1
Setup Subnet Mask
255.255.255.000
The subnet mask. Default is
255.255.255.0
Setup Gateway
192.168.123.001
The network gateway. If no gateway is use,
set to 0.0.0.0
Setup NAME
Butler PRO
The device name, used in most displays.
Setup GROUPID
001
Set the group id for synchronisation of snapshots
in a set of Butler PRO.
Setup STARTUP
show snapshot1
Setup the show to display on startup, snapshot 1,
snapshot 2 or no output.
Setup OFFLINE
show snapshot2
Setup the show to display if the Butler PRO is of-
fline, select snapshot 1, snapshot 2 or no output.
Advanced settings >
Enter the Advanced Settings mode.