Partner
®
EHG430T User's
Manual
15
The
Reminder
specifies the time period until a
Schedule alarm
will be issued.
The second page –
Content
– includes information about the event.
y
Set the date and time and specify the time period until a
Schedule alarm
will
be issued.
y
Press ENTER to open the
Content
page and fill it out.
y
Press ENTER to save a record.
9
The
Schedule
memory is limited to 50 records. The
Not enough memory
message is displayed when the record list is full.
Finding a Recor d
The records are sorted by date and time. Use
u
,
t
to scroll the record list.
Reminder and S chedule alar m
If enabled, the
Reminder
sounds at the determined time until a
Schedule alarm
will be issued, producing an audible beep. The
Reminder
is turned OFF by
default for a new record. The
Reminder
time is adjusted separately for every
individual record.
9
Reminders
and
Schedule alarms
sound even if the device is OFF.
9
If a
Reminder
and a
Daily alarm
are timed to go off for the same time, only
the
Reminder
will be displayed since it has higher priority.
The corresponding
Schedule
record will be displayed in the view mode at this
time.
y
Press any key to interrupt a
Schedule alarm
or a
Reminder
beep.
You can change the record and set the
Reminder
for a later time. Closing the
Schedule
reminder window will bring you back to the section (for example,
Dictionary
) as you were before the alarm went off.
CALCULATOR
y
Press SHIFT+CALC to enter the
Calculator
section.
When entering numbers and operations from the keyboard, there is no need to
press the SHIFT key while in the
Calculator
mode. Use this application as an
ordinary pocket calculator.
METRIC CONVERSION
With the EHG430T you may easily convert measurements from the British-
American system into the metric system commonly used in Europe and vice
versa, as well as convert within each system.
y
Enter the
Metric Conversion
section.
