Date:2016-03-23
10. Headphone jack:
Standard headphone jack. Used when listening to the
TTS or voice memos. Speakers are muted when headphones are connected.
11. Micro USB connector:
Used to connect the device to a computer or an
AC adapter for data transmission or battery charging. When connected to a
computer the device allows options to connect i) for charging only, ii) as USB
memory to upload/download files, an iii) in keyboard mode.
12. Reset button:
Pressing this button resets the device. It is recommended
to use this button only when the device cannot be turned off properly.
Scanning Instructions
The device supports scanning from both left to right and right to left
(automatic – no settings required). It also supports usage with both left and
right hand. Left/right hand setting is found under Settings in the main menu.
Prior to scanning ensure the OCR language is set to correct language (enter
Settings in main menu).
1.
Make sure the DictionaryPen is on.
2.
Select your function (Text Reader/Dictionary/Scan to File).
3.
Select function, e.g. Scan to File.
4.
Hold the device just like a common pen.
5.
Place the document to be scanned on a flat surface. When lowering
the DictionaryPen to the document, make sure to center the text
line to be scanned in the Scanning window. Place the tip of the pen
at the location about half a word in front of the first word to be
scanned.
6.
Push the pen slightly, and scan the words by moving along the text
line as the scanning light turns on. Move straight at a steady pace.
7.
Once the pen is lifted up, the words scanned will be recognised
immediately and displayed on the screen.
