background image

Chapter 3

Z97M-PK USER MANUAL

48

2.Select display devices, set the multiple displays option and to extend desktop for
display “Multi-Monitor technology”.

Change the appearance of your displays

Control Panel  All Control Panel Items  Display  Screen Resolution

Search Control Panel

1

3

4

      Detect

      Identify

3. DELL U2410

Display:

Resolution:

1920 x 1200 (recommended)

Orientation:

Landscape

Disconnect this display

Multiple displays:

 Make this my main display

Advance settings

Make text and other items larger or smaller
What display settings should I choose?

     OK

      Cancel

     Apply

2

 You must select Apply before making additional changes.

!

Extend desktop to this display
Disconnect this display

Step 4. Change the appearance of your displays under Windows 7/8.

Change the appearance of your displays

Control Panel  All Control Panel Items  Display  Screen Resolution

Search Control Panel

1

2

3

4

      Detect

      Identify

1. DELL U2410

Display:

Resolution:

1920 x 1200 (recommended)

Orientation:

Landscape

Extend desktop to this display

Multiple displays:

This is currently your main display.

Advance settings

Make text and other items larger or smaller
What display settings should I choose?

     OK

      Cancel

     

Apply

Show the path of the setting location

Display devices

The type of the display

Set the multiple displays

1.  Enter the Control Panel menu, select the Display in the All Control Panel Items
and click the Screen Resolution, then appears the following screen.

Summary of Contents for Z97M-PK






















































































Reviews: