ECS Z270-LIGHTSABER, User Manual, Page: 69 / 91

Chapter 3
Z270-LIGHTSABER USER MANUAL
62
 LED Light Configuration
Scroll to this item to view the following screen:
Main Advanced Chipset M.I.B. X Security Boot Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
LED Light Firmware Version (2.00)
This item shows the LED Light Firmware Version.
LED Light Color (Rainbow)
This item allows you to set the LED light color.
LED Rainbow Color Changing Speed(ms) (0)
This item allows you to adjust LED Rainbow Color Changing Speed.
LED Light Configuration
LED Light Firmware Version 2.00
LED Light Enabled
LED Light Color Rainbow
LED Rainbow Color Changing Speed(ms) 0
LED Light Brightness 50%
LED Light Behavior Breathe
LED Light Breathe Timer 2 Sec
Over Heat Warning Enabled
LED Light (Enabled)
This item allows you to enable or disable the LED Light.
LED Light Brightness (50%)
This item allows you to set the LED Light Brightness.
LED Light Breathe Timeer (2 Sec)
This item allows you to adjust the LED Light Breathe Timer.
Over Heat Warning (Enabled)
This item allows you to enable or disable Over Heat Warning. If enable this function,
the LED light would turn Red when CPU temperature is Over Heat.
LED Light Behavior (Breathe)
This item allows you to adjust LED Light Behavior.
Press <Esc> to return to the M.I.B. X Menu page.