ECS Z270-LIGHTSABER, User Manual, Page: 62 / 91

Chapter 3
Z270-LIGHTSABER USER MANUAL
55
Power Limit 1/2 Value (Maximum)
Use these items to control the limit of the TDP. These are for Turbo mode.
Power Limit 1/2 Override (Enabled)
Use these items to enable or disable the Power Limit 1/2 Override. If these options
are disabled, BIOS will program the default values for Power Limit 1/2.
Power Limit 1 Window (8)
Power limit 1 Time Window value in seconds. The value may vary from 0 to 128. If the
value is 0, default values will be programmed (28 sec for Mobile and 1 sec for
Desktop). Indicates the time window over which TDP value should be maintained.
Turbo Boost (Enabled)
This item allows you to enable or disable turbo boost.
Scroll to this item and press <Enter> to view the following screen:

Power Limit 3 Settings
Main Advanced Chipset M.I.B. X Security Boot Exit
Enable/DisablePower Limit 3
override. If this option is
disabled, BIOS will leave the
default values for Power Limit
3 and Power Limit 3 Time
Window.
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Power Limit 3 Settings
Power Limit 3 Override Disabled
Power Limit 3 Settings
Use this item to enable or disable the power limit 3 override. If this option is
disabled, BIOS will leave the default values for power limit 3 and power limit 3 time
window.
Press <Esc> to return to the CPU OverClocking Configuration page.