3
Introducing the Motherboard
Onboard LAN (Optional)
This motherboard may support either of the following LAN with following features:
•
Support 10/100 Mbps N-way Auto-negotiation operation
•
Supports Wake-On-LAN function and remote wake-up
•
Supports LED pins for various network activity indications
•
Supports Full Duplex Flow Control (IEEE 802.3x)
•
Integrated 10/100/1000 transceiver
•
Supports PCI rev. 2.3, 32-bit, 33/66MHz
•
Crossover Detection & Auto-Correction
•
Wake-on-LAN and remote wake-up support
1394a FireWire (Optional)
•
Fully compliant with provisions of IEEE Std 1394-1995 for a high-performance
serial bus and IEEE Std 1394a-2000
•
Two IEEE Std 1394a-2000 fully compliant cable ports at 100M/200M400M bits/
s
•
Power management
•
Wake-up alarms
•
CPU parameters
•
CPU and memroy timing
Some hardware specifications and software items are subject to change
with out prior notice.
BIOS Firmware
This motherboard uses AWARD BIOS that enables users to configure many system
features including the following:
The firmware can also be used to set parameters for different processor clock speeds.
•
Two PS/2 ports for mouse and keyboard
•
One serial port
•
One parallel port
•
Four USB ports
•
One 1394a port (optional)
•
One LAN port (optional)
•
Audio jacks for microphone in, line-in and 8-ch Audio output
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
The motherboard supports UltraDMA bus mastering with transfer rates of 133/100/66/
33 MB/s.
The motherboard comes with the following expansion options:
Expansion Options
•
One PCI Express x16 for Graphic Interface
•
Two PCI Express x1 slots
•
Three 32-bit PCI v2.3 compliant slots
•
Two 40-pin IDE connectors supporting up to 4 IDE devices
•
One floppy disk drive interface
•
Four 7-pin SATA connectors
Summary of Contents for RX480-A
Page 1: ...iii...
Page 2: ...iv...
Page 10: ...4 IntroducingtheMotherboard Motherboard Components...
Page 12: ...6 IntroducingtheMotherboard Memo...