10
Installing the Motherboard
Connecting Case Components
After you have installed the motherboard into a case, you can begin con-
necting the motherboard components. Refer to the following:
1
Connect the CPU cooling fan cable to
CPU_FAN
.
2
Connect the system cooling fan connector to
SYS_FAN
.
3
Connect the power fan connector to
PWR_FAN
.
4
Connect the case speaker cable to
J1.
5
Connect the case switches and indicator LEDs to the
PANEL1
.
6
Connect the standard power supply connector to
ATX_POWER
.
7
Connect the auxiliary case power supply connector to
ATX12V
.
Connecting 20/24-pin power cable
Users please note that the 20-pin and 24-pin power cables can both be con-
nected to the ATX1 connector. With the 20-pin power cable, just align the 20-
pin power cable with the pin 1 of the ATX1 connector. However, using 20-pin
power cable may cause the system to become unbootable or unstable because of
insufficient electricity. A minimum power of 300W is recommended for a
fully-configured system.
20-pin power cable
24-pin power cable
With ATX v1.x power supply, users please
note that when installing 20-pin power cable,
the latche of power cable clings to the left
side of the ATX_POWER connector latch,
just as the picture shows.
With ATX v2.x power supply, users please
note that when installing 24-pin power cable,
the latches of power cable clings to the right
side of the ATX_POWER connector latch.
Summary of Contents for RX480-A
Page 1: ...iii...
Page 2: ...iv...
Page 10: ...4 IntroducingtheMotherboard Motherboard Components...
Page 12: ...6 IntroducingtheMotherboard Memo...