ECS RS482M-M, Manual, Page: 31 / 90

25
Installing the Motherboard
COM2: Onboard serial port header (optional)
Connect a serial port extension bracket to this header to add a second serial port to your
system.
1
NDCDB Data carry detect
2
NSINB Serial Data In
3
NSOUTB Serail Data Out
4
NDTRB Data terminal ready
5
GND Ground
6
NDSRB Date set ready
7
NRTSB Request to send
8
NCTSB Clear to send
9
NRIB Ring Indicator
10
KEY Key
Pin Signal Name Function
WOL1: Wake On LAN connector (optonal)
Pin Signal Name Function
1
A5VSB
+5V stand by power
2
GND
Ground
3
Ring#
wake up signal (low active)
If you have installed a LAN card, use the cable provided with the card to plug into the WOL
connector onboard. This enables the Wake On LAN (WOL1) feature. When your system is
in a power -saving mode, any LAN signal automatically resumes the system. You must
enable this item using the power Management page of the setup Utility in the BIOS. See
Chapter 3 for more information.
IRDA: Infrared header
The motherboard supports an Infrared (IRDA) data port. Infrared ports allow the wireless
exchange of information between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other computers.
(optional)
2 Key
1 VCC
3 IRRX
4 GND
5 IRTX
Pin Signal Name