ECS RS480-M Manual, Manual, Page: 47 / 86

41
Using BIOS
Resume Event Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
Resume Event Control
Item Help
Menu Level
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Resume By PCI PME [Enabled]
Resume By WOL/WOM/Ring [Disabled]
RTC Alarm Resume [Disabled]
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 0 0
x
x
Resume by PCI PME (Enabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of
the month), hour, minute and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system every day at the specified
time.
Resume by WOL/WOM/Ring (Disabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of WOL/WOM/Ring device is detected.
• Date of Month : Use this item to define the date of month when using the RTC
alarm to resume the system.
• Resume Time : Use this item to define the time when using the RTC alarm to
resume the system.
Press <Esc> to return to the Power Management Setup screen.