P6LX2-A User’s Manual
4:
Reference Information – 4.9
System Memory Specifications
The memory subsystem on this mainboard has four 168-pin
DIMM sockets. The sockets function independently and can use
either unbuffered EDO DRAM or SDRAM 3.3–Volt modules.
Single or double-sided modules are supported up to a total
memory capacity of 512MB SDRAM or 1GB EDO.
Memory Configurations
You can install any combination of module sizes as long as
you follow these requirements:
• All modules must use unbuffered 3.3–Volt RAM
• All modules have same operating speed, e.g. 60ns
Other than these requirements, there is no limitation on the
variety of combinations, so they are not listed here. We recom-
mend using one type of DRAM, either EDO or Synchronous.
SDRAM is faster than EDO.