JP2: Keyboard Power On Jumper
This jumper lets you use a typed-in password as a power switch to turn
your system on. If you enable this property, you need to define the
password or the hot keys using the setup utility. See Chapter 3.
Function Jumper
Cap
Disable keyboard power on Short pins 1-2
Enable keyboard power on
Short pins 2-3
1
2
3
JP2
Note:
The keyboard power on function may not function if you are
running this mainboard with an AT power supply.
JP4: Select Slot1 or Socket-370 Processor Jumper
Use this 3-pin jumper to prepare the mainboard for the installation of a
slot1 processor cartridge or a socket-370 PPGA Celeron processor.
1 2 3
JP4
Function Jumper
Cap
Select slot1 processor
Short pins 1-2
Select socket-370 processor
Short pins 2-3
JP5: Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
Function Jumper
Cap
Normal Operation
Short pins 1-2
Clear CMOS
Short pins 2-3
1
2
3
JP5
15