16
Floppy 3 Mode Support
Default: Disabled
Floppy 3 Mode is a special mode that supports 3.5” diskettes with a capacity of 1.2 MB.
Outside of Japan, very few people use this kind of diskette.
Video
Default: EGA/VGA
This item defines the video mode of the system. This mainboard has a built-in VGA
graphics system so you must leave this item at the default value.
Halt On
Default: All Errors
This item defines the operation of the system POST (Power On Self Test) routine. You can
use this item to select which kind of errors in the POST are sufficient to halt the system.
Base, Extended and Other Memory.
These items show how much memory is available on the system. They are automatically
detected by the system so you cannot manually make changes to these items.
BIOS Feature Setup Option
This option displays a table of items which defines more advanced information about
your system. You can make modifications to most of these items without introducing
fatal errors to your system.
Virus Warning
Default: Disabled
When this item is enabled it provides some protection against viruses which try to write to
the boot sector and partition table of your hard disk drive. This item is disabled as a default
so that you can install an operating system. We recommend that you enable Virus Warning
as soon as you have installed your disk with an OS.
CPU Internal Cache
Default: Enabled
All the processors that can be installed in this mainboard use internal (level 1) cache
memory to improve performance. Leave this item at the default value Enabled for better
performance.