P5HX-A
User’s Manual 1-33
INTEGRATED PERIPHERALS
ROM PCI/ISA BIOS <<P5HX-A>>
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Enabled
PCI Slot IDE 2nd Channel : Enabled
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART 2 Mode : Standard
Onboard Parallel Port : 378H/IRQ7
Onboard Parallel Mode : SPP
ESC : Quit
↑↓→←
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3 -7. PNP CONFIGURATION SETUP Screen
IDE HDD Block Mode
- Determines the block transfer mode will be used or not .
The available options are:
•
Enabled (default)
•
Disabled
PCI Slot IDE 2nd Channel
- Enables or Disables the second IDE channel of PCI
slot if users use the PCI IDE card on board. The available options are:
•
Enabled (default)
•
Disabled
On-Chip Primary/Secondary PCI IDE
- Enables or Disables the primary/
secondary PCI IDE of Intel IDE controller. Selecting
isabled” can release
IRQ14.
•
Enabled (default)
•
Disabled
IDE Primary/Secondary Master/ Slave PIO
- Sets the advanced hard disk PIO
transfer mode which effects your hard disk transfer rate. The program will auto
detect the mode of this option when users select “ Auto”. Otherwise, you must set
this option by yourself. The available options are:
•
Auto (default)
•
Mode 0
•
Mode 1
•
Mode 2
•
Mode 3
•
Mode 4