manualshive.com logo in svg

ECS P4VXAD+, Manual, Page: 50 / 61

Share
Download
ECS P4VXAD+ Manual Download Page 50

 

 IRQ/Event Activity Detect 

Scroll to this item and press <Enter> to view the following screen: 

Phoenix – AwardBIOS CMOS Setup Utility 

IRQ/Event Activity Detect 

Item Help 

 

PS/2 KB /WakeUp from S3/S4/S5 

[Disabled] 

         USB Resume from S3 

[Enabled] 

 VGA 

[OFF] 

 

LPT & COM 

[LPT/COM] 

 

HDD & FDD 

[ON] 

 PCI 

Master 

[OFF] 

 

PowerOn by PCI Card 

[Enabled] 

 

Wake Up On LAN/Ring 

[Disabled] 

 

RTC Alarm Resume 

[Disabled] 

  x  Date (of Month) 

  0 

  x  Resume Time (hh:mm:ss) 

0   0   0 

     IRQs Activity Monitoring 

[Press Enter] 

Menu Level     

 

 

↑

 

↓

 

→

 

←

 : Move 

Enter  : Select 

+/-/PU/PD:Value: 

F10: Save  ESC: Exit  F1:General Help

 

F5:Previous Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

This item opens a submenu that enables you to set events that will resume 
the system from a power saving mode.  

PS/2 KB WakeUp from S3/S4/S5 (Disabled) 

This option allows you to set hot key combination to turn on the system. 

*This item is only available when the mainboard supports the S3 feature.

 

USB Resume from S3 (Enabled) 

When set to Enabled, the system power will resume the system from a power 
saving mode if there is any USB port activity. 

*This item is only available when the mainboard supports the S3 feature.

 

VGA (Off) 

When set to On, the system power will resume the system from a power sav-
ing mode if there is any VGA activity.  

LPT & COM (LPT/COM ) 

When this item is enabled, the system will restart the power-saving timeout 
counters when any activity is detected on the serial ports, or the parallel port. 

HDD & FDD (ON) 

When this item is enabled, the system will restart the power-saving timeout 
counters when any activity is detected on the hard disk drive or the floppy 
diskette drive. 

PCI Master (OFF) 

When set to Off, any PCI device set as the Master will not power on the sys-
tem. 

PowerOn by PCI Card (Enabled) 

Use this item to enable PCI activity to wakeup the system from a power sav-

46 

Summary of Contents for P4VXAD+






























































Reviews:

No comments