manualshive.com logo in svg

ECS P4VXAD+, Manual, Page: 42 / 61

Share
Download
ECS P4VXAD+ Manual Download Page 42

 

for graphics memory. We recommend that you leave this item at the default 
value. 

AGP Mode (4X) 

This item allows you to enable or disable the caching of display data for the 
processor video memory. Enabling AGP-4X Mode can greatly improve the 
display speed. Disable this item if your graphics display card does not support 
this feature.   

AGP Driving Control (Auto) 

This item is used to signal driving current on AGP cards to auto or manual. 
Some AGP cards need stronger than normal driving current in order to oper-
ate. We recommend that you set this item to the default. 

• 

AGP Driving Value:

 When AGP Driving Control is set to Man-

ual, use this item to set the AGP current driving value. 

AGP Master 1 WS Write (Disabled) 

This implements a single delay when writing to the AGP Bus. By default, two-
wait states are used by the system, providing greater stability. 

AGP Fast Write (Disabled) 

This item lets you enable or disable the caching of display data for the video 
memory of the processor. Enabling this item can greatly improve the display 
speed. Disable this item if your graphics display card does not support this 
feature. 

AGP Master 1 WS Write (Disabled) 

This implements a single delay when writing to the AGP Bus. By default, two-
wait states are used by the system, providing greater stability. 

AGP Master 1 WS Read (Disabled) 

This implements a single delay when reading to the AGP Bus. By default, two-
wait states are used by the system, allowing for greater stability. 

Press <Esc> to return to the Advanced Chipset Features screen. 

 

 

 

 

 

 

 

 

 

 

38 

Summary of Contents for P4VXAD+






























































Reviews:

No comments