background image

 

 

This publication, photographs, illustrations and software are 
under the protection of international copyright laws and all 
rights reserved. It does not allow any reproduction of this 
manual, content and any materials contained herein without 
the written consent of the authentic manufacturer.  

The information in this manual is subject to change without 
notice. The manufacturer does neither represent nor warrant 
the contents hereof; and specifically disclaims any implied 
warranties of merchantability or fitness for any particular pur-
pose. Furthermore, the manufacturer reserves the right to 
revise and change this publication from time to time, without 
the obligation of notifying any person of such revision or 
changes. 

Trademarks 

IBM, VGA, and PS/2 are registered trademarks of Interna-
tional Business Machines. 
Intel, Pentium, Pentium-II, and MMX are registered trade-
marks of Intel Corporation. 
Microsoft, MS-DOS and Windows 95/98/NT/2000 are regis-
tered trademarks of Microsoft Corporation. 
PC-cillin and ChipAwayVirus are trademarks of Trend Micro 
Inc. 
AMI is a trademark of American Megatrends, Inc.  
MediaRing Talk is a registered trademark of MediaRing Inc. 
3Deep is a registered trademark of E-Color Inc. 
It has been acknowledged that all mentioned brands or prod-
uct names are trademarks or registered trademarks of their 
respective holders.   

 

 

 

 

Copyright © 2001 

All Rights Reserved 

P4ITA2, V1.0 

 

Summary of Contents for P4ITA2












































Reviews: