ECS NFORCE3-A, Manual

Page: 48 / 56

42
Using BIOS
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
CPU FAN Control by (Always On)
This item lets you adjust CPU Fan.
System Component Characteristics
These fields provide you with information about the systems current operating status.
You cannot make changes to these fields.
• CPU Vcore Voltage
• +3.3V
• +5.0V
• +12.0V
• 5V(SB)
• Voltage Battery
• Current CPU Temp
• Current CPU FAN Speed
• Current SYS FAN Speed
• IRQ Resources [Press Enter]: :
In the IRQ Resources submenu, if you assign
an IRQ to Legacy ISA, then that Interrupt Request Line is reserved for a legacy
ISA expansion card. Press <Esc> to close the IRQ Resources submenu.
In the Memory Resources submenu, use the first item Reserved Memory Base to
set the start address of the memory you want to reserve for the ISA expansion
card. Use the section item Reserved Memory Length to set the amount of
reserved memory. Press <Esc> to close the Memory Resources submenu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-standard
VGA cards. This board includes a built-in VGA system that does not require palette
snooping so you must leave this item disabled.
PC Health Status
On motherboards that support hardware monitoring, this item lets you monitor the
parameters for temperatures and fan speeds.
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level
F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Shutdown Temperature [Disabled]
CPU FAN Control by [Always ON]
CPU Vcore
+3.3V
+5.0V
+12.0V
5V(SB)
Voltage Battery
Current CPU Temp
Current CPU FAN Speed
Current SYS FAN Speed