10
Checking Jumper Settings
The following illustration shows the location of the mainboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper Type
Description
Setting
(
default
)
JP1 3-pin
Clear
CMOS 1-2: Normal
2-3: Clear CMOS
JP1
1
JP6 3-pin
SATA
HDD
1-2: Enable
2-3: Disable
JP6
1
FID JP1
10-pin
CPU ratio selector
Refer to the table on the next page.
Jumper 1
–
This jumper is use to clear all the current data stored in the
CMOS memory. Refer to the following instructions:
1. Turn the system off.
2. Short pins 2 and 3 on jumper 1.
3. Return the jumper to the normal setting.
4. Turn the system on. The BIOS is returned to
the default settings.
Jumper 6 –
Use this jumper to disabled or enabled the Serial ATA func-